How to Eject Water from Your iPhone 13 Speakers: A Safe and Effective Guide

If you’ve ever accidentally dropped your iPhone 13 in water or found yourself with muffled sound after a spill, you’re probably familiar with the frustration of trying to clear the water out of your speakers. Whether it’s the iPhone 13 Speakers, 13 mini, 13 Pro, or 13 Pro Max, water can quickly get trapped in the speaker mesh, causing muffled audio, crackling noises, or even distorted calls. But don’t worry—there’s a simple, safe, and effective solution you can try without resorting to rice, heat, or other risky methods.

In this guide, we’ll walk you through the process of ejecting water from your iPhone 13 speakers using sound waves, a technique that’s both gentle and reliable. Let’s dive into the steps you need to take to restore clear audio from your iPhone.

Why Does Water Get Trapped in iPhone 13 Speakers?

The iPhone 13 is rated with an IP68 water resistance certification, which means it’s designed to handle some water exposure, like splashes or brief submersion. However, this doesn’t mean the phone is entirely waterproof. Over time, the mesh that covers the speaker can trap water droplets, causing the audio to become muffled or distorted.

When water enters the speaker area, it gets trapped behind the mesh, affecting the diaphragm that creates sound. The surface tension of the water droplets blocks the speaker’s ability to vibrate and produce sound, leading to that frustrating underwater or crackling sound. The quicker you can get the water out, the less likely it is to cause long-term damage.

A Sound-Based Solution: How It Works

Using sound waves to eject water from your iPhone’s speakers is a technique based on the physics of acoustic pressure. When you play low-frequency tones, they generate vibrations that help break the surface tension holding the water droplets in place. This gentle method encourages the water to move out of the speaker mesh without causing any harm to the device. Unlike using heat or compressed air, which can damage seals or push water deeper inside, sound-based ejection is a safe and effective solution.

Think of it like the Apple Watch’s Water Lock feature, which uses vibrations to clear water from the speaker when activated. While the iPhone doesn’t have a built-in water-eject feature, you can replicate the same effect by using a web-based tool designed to generate these vibrations.

Step-by-Step Guide: How to Eject Water from Your iPhone 13 Speakers

Follow these simple steps to eject water from your iPhone 13 speakers:

1. Remove Your Case: If you have a case on your iPhone, take it off, especially if the case covers the speaker area. Moisture can get trapped under the case, preventing the water from escaping.
   
2. Dry the Speaker Area: Use a lint-free cloth to gently wipe around the speaker grille, making sure no water remains visible. Don’t insert anything into the mesh, as this could cause damage.
   
3. Use the Speaker Cleaner Tool:
   Open the Speaker Cleaner tool in your browser. It works directly in Safari or Chrome, so no app download is required.
   
4. Maximize the Volume: Ensure the volume is set to the maximum level, and make sure the Silent mode switch is turned off.
   
5. Position Your iPhone: Hold your iPhone with the speaker facing down over a soft surface, like a towel, to catch any water that may fall out.
   
6. Play the Water-Eject Tone: Tap “Start” on the Speaker Cleaner tool and let the tone play for the full cycle. The sound vibrations will work to push the water out of the speaker mesh.
   
7. Check the Sound: After the tone finishes, pause for 10-15 seconds, then check the clarity of your audio by playing a song or voice note. If the sound is still muffled, repeat the process 2-3 times.
   
8. Let It Dry: Once the sound improves, leave your phone in a well-ventilated area for 30-60 minutes to allow any remaining moisture to evaporate.
   

If you continue to see the “Liquid Detected” warning when trying to charge, it’s best to leave your phone to dry for up to 24 hours before attempting to charge again.

Why the Speaker Cleaner Tool is the Best Option

Instead of relying on risky methods like rice or heat, using a sound-based approach is both safe and effective. The Speaker Cleaner tool is easy to use, and it doesn’t require any app installations or downloads. It works right in your browser, providing a hassle-free way to clear your iPhone 13 speakers of water. It’s a fast and convenient solution for anyone who wants to solve this issue without resorting to unnecessary or potentially damaging methods.

By using sound to eject the water, you avoid the risk of pushing water further into your device, which can happen with compressed air or even a hairdryer. Additionally, since no apps or permissions are needed, there’s no risk of introducing malware or bugs that often come with downloading third-party applications.

When to Seek Professional Help

If you’ve tried the Speaker Cleaner tool multiple times and still experience muffled or distorted audio, it might be time to consider professional help. Persistent issues could indicate deeper internal damage, or there may be moisture trapped in the charging port, affecting the phone’s performance. In such cases, it’s best to reach out to Apple Support for further assistance.

Conclusion

Water in your iPhone 13 speakers can be frustrating, but with the right method, you can safely and effectively clear it out. The Speaker Cleaner tool provides a simple, sound-based solution that uses low-frequency tones to eject water, restoring clear audio without the need for risky DIY methods. By following the steps outlined above, you’ll have your iPhone back to its original, crystal-clear sound in no time.